Error Code 8C1
The washer's vibration sensor board has detected a problem.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C1
What This Means
MEMS PBA error or data check detected; Wire connection issues; Main PBA Silver Nano Part malfunction
What actually causes this:
The vibration sensor board has a loose connection or has failed.
First Thing to Check
Unplug the washer for 60 seconds, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check the wire connections
- 2
2. Replace if necessary
- 3
3. Check the wire connections to MEMS PBA
- 4
4. Replace the MEMS PBA
- 5
5. Main PBA wire connection check or PBA Silver Nano Part malfunction; replace if necessary
Other Error Codes for WA51A5505AW
The washer's clutch moved but did not reach the correct position.
The washer's main computer chip has malfunctioned.
The washer's main computer chip has malfunctioned.
The washer's main computer chip has malfunctioned.
The drying heater has an electrical problem.
The washer has detected a water leak somewhere in the system.
The laundry load is uneven and the washer cannot spin safely.
The washer detected too many soap bubbles and is working to remove them.