Error Code PC1
The washer's clutch moved but did not reach the correct position.
Moderate
Address soon - your appliance may not work properly
Also displayed as: PC1
What This Means
Clutch error determined after clutch movement occurred; Clutch position sensor failure
What actually causes this:
The clutch mechanism is worn or jammed, preventing it from properly engaging.
First Thing to Check
Unplug the washer for 60 seconds, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check the clutch motor and position sensor
- 2
2. Verify the clutch mechanism moves freely
- 3
3. Replace clutch assembly if faulty
This Error Applies To
Samsung WA51A5505A Series Washers (2024) (2024–present)
Related Error Codes
The washer's main computer chip has malfunctioned.
The washer's main computer chip has malfunctioned.
The washer's main computer chip has malfunctioned.
The incoming water is too hot for the selected wash cycle.
The washer cannot pump out the water after washing.
The washer's display screen cannot communicate with the main board.
The washer is getting too much electrical power from the outlet.
The control panel and main circuit board cannot talk to each other.