Error Code 8CB2
The washer's position sensor thinks the machine is not level.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8CB2
What This Means
MEMS PBA set position is faulty; Washer not level
What actually causes this:
The washer is not level or the internal position sensor has failed.
First Thing to Check
Place a level on top of the washer and adjust the feet until the machine is perfectly level.
Parts Involved
How to Fix
- 1
1. Check washer is level
- 2
2. Replace MEMS PBA if necessary
- 3
3. Replace Main PBA if issue persists
Other Error Codes for WA52A5500AP
The washer's clutch moved but did not reach the correct position.
The washer's main computer chip has malfunctioned.
The washer's main computer chip has malfunctioned.
The washer's main computer chip has malfunctioned.
The drying heater has an electrical problem.
The washer has detected a water leak somewhere in the system.
The laundry load is uneven and the washer cannot spin safely.
The washer detected too many soap bubbles and is working to remove them.