Error Code AC3
An internal module is not communicating with the main board.
Moderate
Address soon - your appliance may not work properly
Also displayed as: AC3
What This Means
Signals between the DR Module and main PBAs not sensed due to communication check; Incorrect or loose connector connections between DR Module and main PBAs; Faulty soldering on DR Module
What actually causes this:
A connector between modules has worked loose over time from vibration.
First Thing to Check
Unplug the washer for 60 seconds, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check connector connections between the DR Module and main PBAs carefully
- 2
2. Check for incorrect or loose connections
- 3
3. Remove the DR Module and check for any faulty soldering
Other Error Codes for WA52A5500AP
The washer's clutch moved but did not reach the correct position.
The washer's main computer chip has malfunctioned.
The washer's main computer chip has malfunctioned.
The washer's main computer chip has malfunctioned.
The drying heater has an electrical problem.
The washer has detected a water leak somewhere in the system.
The laundry load is uneven and the washer cannot spin safely.
The washer detected too many soap bubbles and is working to remove them.