Error Code 8CB1
An internal vibration sensor connection has failed.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8CB1
What This Means
Wire connections to MEMS PBA are disconnected or loose
What actually causes this:
The internal vibration sensor board has a broken connection.
First Thing to Check
Unplug the washer for 60 seconds, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Replace the MEMS PBA
- 2
2. If issue persists, replace the Main PBA
Other Error Codes for WA52A5500AV
The washer's clutch moved but did not reach the correct position.
The washer's main computer chip has malfunctioned.
The washer's main computer chip has malfunctioned.
The washer's main computer chip has malfunctioned.
The drying heater has an electrical problem.
The washer has detected a water leak somewhere in the system.
The laundry load is uneven and the washer cannot spin safely.
The washer detected too many soap bubbles and is working to remove them.