Error Code 8CA2
The washer's position sensor thinks the machine is not level.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8CA2
What This Means
Washer is not in horizontal level; MEMS PBA set position is faulty
What actually causes this:
The washer is sitting on an uneven floor or the leveling legs need adjustment.
First Thing to Check
Place a level on top of the washer and adjust the feet until the machine is perfectly level.
Parts Involved
How to Fix
- 1
1. Check that the washer is in horizontal level
- 2
2. If level is correct, replace the MEMS PBA
- 3
3. If issue persists, replace the Main PBA
Other Error Codes for WA52A5500AW
The washer's clutch moved but did not reach the correct position.
The washer's main computer chip has malfunctioned.
The washer's main computer chip has malfunctioned.
The washer's main computer chip has malfunctioned.
The drying heater has an electrical problem.
The washer has detected a water leak somewhere in the system.
The laundry load is uneven and the washer cannot spin safely.
The washer detected too many soap bubbles and is working to remove them.