Error Code SUD
There are too many soap suds in the washer.
Moderate
Address soon - your appliance may not work properly
Also displayed as: SUD or SUdS
What This Means
Too much detergent used; Non-HE detergent used in HE washer; Excessive foaming detected during wash cycle
What actually causes this:
Too much detergent was added, or regular (non-HE) detergent was used instead of High Efficiency detergent.
First Thing to Check
Let the washer finish its suds-reduction cycle — it will handle this automatically. Next time, use less detergent.
How to Fix
- 1
1. Verify customer is using HE (High Efficiency) detergent
- 2
2. Check amount of detergent being used
- 3
3. 'SUdS' displayed during foam removal, 'End' displayed when removal is finished
- 4
4. Normal cycle proceeds after foaming is removed
Other Error Codes for WA52J8060AW
The washer's temperature sensor is giving wrong readings.
A specific internal water leak has been found.
The washer's vibration sensor board has a problem.
The washer's clutch position sensor is sending incorrect signals.
The washer's main computer chip has crashed.
The washer cannot detect how much water is in the tub.
The washer's motor cannot spin or is getting bad signals.
The washer is getting too much electrical power.