Name: Samsung WA52J8700AP
Brand: Samsung

Question 1

What does error code 1C mean on Samsung WA52J8700AP?

Accepted Answer

Your washer cannot detect the water level properly.. Cause: Sensor hose is damaged (punctured); Hose is clogged with foreign material; Hose is folded; Too much lubricant applied to the air hose insertion part; Hose disengaged; Part fault (faulty internal soldering); Water level sensor terminal is disengaged; Main PBA fault; PBA connector terminal not connected.

Question 2

What does error code 3C mean on Samsung WA52J8700AP?

Accepted Answer

Your washer's motor cannot spin properly.. Cause: Motor spin net is not engaged; Motor's internal coil is damaged (short-circuited or cut); Hall sensor terminal is not connected; Foreign material (a screw) has entered the motor; Motor overloaded due to too much laundry (non-sensing); Motor hall sensor terminal is not connected; PBA fault; Motor driving signal from the PBA is weak; Unstable relay operation; Erroneous operating signals from the motor hall sensor; IPM terminal of the main PBA is not connected; DD motor cover is out of place; PCB housing terminal is not connected; DD motor fault.

Question 3

What does error code 4C mean on Samsung WA52J8700AP?

Accepted Answer

Your washer is not getting enough water to fill.. Cause: Foreign material is entering the water supply valve; Water supply valve terminal is not connected (wire disconnected); Warm water and rinse connectors are wrongly connected to each other; PCB terminal from drain hose to detergent drawer is not connected; Transparent hose is folded or torn; Cold and warm water supply hoses are wrongly engaged.

Question 4

What does error code 4C2 mean on Samsung WA52J8700AP?

Accepted Answer

The water coming into your washer is too hot for the selected cycle.. Cause: Cold and warm water supply hoses are wrongly engaged into each other; Temperature of water supplied through the dry valve during a dry cycle is sensed as higher than 70°C; Water temperature is sensed as higher than 50°C in Wool or Lingerie courses.

Question 5

What does error code 5C mean on Samsung WA52J8700AP?

Accepted Answer

Your washer cannot pump the water out.. Cause: Pump motor impeller is damaged internally; Wrong voltage is supplied to the parts; Part fault; Freezing in the winter season; Drain hose is clogged (injection check, foreign material); Clogged with foreign material; Water pump terminal is not connected; Debris collected inside the drain pump (rubber bands, bills, cotton, hair pins, coins).

Question 6

What does error code 8C mean on Samsung WA52J8700AP?

Accepted Answer

Your washer's vibration sensor board has a fault.. Cause: Main PBA wire connection check; PBA silver nano part malfunction; MEMS PBA is defective; Water level sensor is defective.

Question 7

What does error code 8C1 mean on Samsung WA52J8700AP?

Accepted Answer

Your washer's vibration sensor has detected a data error.. Cause: Check detected in the MEMS PBA; Data check detected; Wire connection issues.

Question 8

What does error code 8C2 mean on Samsung WA52J8700AP?

Accepted Answer

Your washer's vibration sensor board has failed.. Cause: MEMS PBA sensor fault; Wire disconnection.

Question 9

What does error code 9C1 mean on Samsung WA52J8700AP?

Accepted Answer

Your washer is not getting enough electrical power.. Cause: Consumer's power conditions are faulty; Under voltage is supplied; Plug receptacle (extension cord) is used; Momentary low voltage drop up to 10V when connecting wire is 1m; Main PBA fault (sometimes).

Question 10

What does error code 9C2 mean on Samsung WA52J8700AP?

Accepted Answer

Your washer is getting too much electrical power.. Cause: Consumer's power conditions are faulty; Over voltage is supplied; Main PBA fault (sometimes).

WA52J8700AP

Error Codes

On this page

Warranty

Samsung Support

Track your Samsung

Code	Meaning	Severity
1C	Your washer cannot detect the water level properly.	Moderate
3C	Your washer's motor cannot spin properly.	Moderate
4C	Your washer is not getting enough water to fill.	Moderate
4C2	The water coming into your washer is too hot for the selected cycle.	Moderate
5C	Your washer cannot pump the water out.	Moderate
8C	Your washer's vibration sensor board has a fault.	Moderate
8C1	Your washer's vibration sensor has detected a data error.	Moderate
8C2	Your washer's vibration sensor board has failed.	Moderate