Error Code 9C2
Your washer is getting too much electrical power.
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: 9C2
What This Means
Consumer's power conditions are faulty; Over voltage is supplied; Main PBA fault (sometimes)
What actually causes this:
The electrical outlet is providing higher than normal voltage, which can damage the washer's electronics.
First Thing to Check
Unplug the washer immediately and try a different wall outlet.
Parts Involved
How to Fix
- 1
1. Check the consumer's power conditions and verify the operating voltage
- 2
2. Connect a tester to internal power terminals during Boil or Dry operations
- 3
3. Check the voltages
- 4
4. Check for Main PBA fault
Other Error Codes for WA52J8700AW
Your washer's leak sensor has been triggered.
Your washer's door-related module has lost connection.
Your washer's motor speed controller has lost connection to the main board.
Your washer is overfilling with water.
Your washer's power module is overheating.
Your washer has detected a water leak.
Your washer's main computer chip has failed.
Your washer's motor cannot spin properly.