Error Code OC
Your washer is overfilling with water.
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: OC
What This Means
Water is supplied continually because the water level detection does not work; Drain hose is clogged and there is an injection (at a narrow section) preventing water level detection; Water is supplied continually because of freezing or foreign material in the water supply valve; Water level sensor is degraded
What actually causes this:
The water level sensor has failed, so the washer does not know when to stop filling, or the water inlet valve is stuck open.
First Thing to Check
Turn off both water supply faucets behind the washer immediately to stop the water flow.
Parts Involved
How to Fix
- 1
1. Check if the water level sensor is replaced or defective
- 2
2. Check whether water is being supplied continuously due to freezing or foreign materials in the water supply valve
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
Other Error Codes for WA52J8700AP
Your washer's vibration sensor board has a fault.
Your washer cannot detect the position of its internal clutch.
Your washer's main computer chip has failed.
Your washer's vibration sensor has detected a data error.
Your washer's water heating element has a specific fault.
Your washer's drying heater has a specific fault.
Your washer's vibration sensor board has failed.
Your washer's motor speed controller has lost connection to the main board.