Error Code DC
Your washer does not detect the lid as properly closed.
Moderate
Address soon - your appliance may not work properly
Also displayed as: DC
What This Means
Switch contact check because of a deformation of the door hook; Door is pulled by force; Occurs in Boil wash because the door is pushed due to a pressure difference from internal temperature changes
What actually causes this:
The lid is not fully shut, or something is keeping it from closing completely, like a piece of laundry caught in the opening.
First Thing to Check
Open and firmly close the lid, making sure nothing is caught in the way.
Parts Involved
How to Fix
- 1
1. Check the Reed SW resistance between terminals — Resistance: Approx. 0.2 ohms (Checking Part: White-Green Wire)
- 2
2. Since 120V power is connected, check if door switch is defective
- 3
3. As this check occurs because the door is opened, close the door
Other Error Codes for WA52J8700AW
Your washer's leak sensor has been triggered.
Your washer's door-related module has lost connection.
Your washer's motor speed controller has lost connection to the main board.
Your washer is overfilling with water.
Your washer's power module is overheating.
Your washer has detected a water leak.
Your washer's main computer chip has failed.
Your washer's motor cannot spin properly.