Error Code PC1
Your washer's clutch position sensor is giving incorrect readings.
Moderate
Address soon - your appliance may not work properly
Also displayed as: PC1
What This Means
After position of the clutch is detected, the signal of the clutch hall goes wrong; Clutch hall sensor malfunction
What actually causes this:
The sensor that tracks the clutch position has worn out or developed a fault.
First Thing to Check
Unplug the washer for 60 seconds, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check the clutch hall sensor connections
- 2
2. Verify clutch position detection
- 3
3. Replace clutch sensor or assembly if defective
Other Error Codes for WA52J8700AW
Your washer's leak sensor has been triggered.
Your washer's door-related module has lost connection.
Your washer's motor speed controller has lost connection to the main board.
Your washer is overfilling with water.
Your washer's power module is overheating.
Your washer has detected a water leak.
Your washer's main computer chip has failed.
Your washer's motor cannot spin properly.