Error Code SUD
Your washer has detected too many soap suds.
Moderate
Address soon - your appliance may not work properly
Also displayed as: Sud / SUdS
What This Means
Too much foaming is detected; Excessive detergent used; Wrong type of detergent (non-HE) used
What actually causes this:
Too much detergent was used, or a non-HE (High Efficiency) detergent was used in this high-efficiency washer.
First Thing to Check
Wait for the washer to finish removing the suds on its own — this is normal and it will resume the cycle.
How to Fix
- 1
1. Wait for the washer to remove the foaming — 'Sud' or 'SUdS' is displayed during removal
- 2
2. 'End' is displayed when the removal of foaming is finished
- 3
3. Normal cycle proceeds after foaming removal
Other Error Codes for WA52J8700AW
Your washer's leak sensor has been triggered.
Your washer's door-related module has lost connection.
Your washer's motor speed controller has lost connection to the main board.
Your washer is overfilling with water.
Your washer's power module is overheating.
Your washer has detected a water leak.
Your washer's main computer chip has failed.
Your washer's motor cannot spin properly.