Error Code TC1
Your washer cannot properly measure the water temperature.
Moderate
Address soon - your appliance may not work properly
Also displayed as: TC1
What This Means
Washing heater sensor in the tub has a contact check or temperature sensor fault; Connector is connected incorrectly or is disconnected; Water level sensor operates without water because the water is frozen or other reason; Temperature sensor detects 100-150°C causing the machine to turn power off
What actually causes this:
The temperature sensor that monitors wash water has failed or has a loose connector.
First Thing to Check
Try running a cold water cycle to see if the washer works without temperature sensing.
Parts Involved
How to Fix
- 1
1. Check the washing heater temperature sensor connections and connector
- 2
2. Faulty and incorrect connections — A TC1 check occurs
- 3
3. If the washing heater temperature sensor has a functional error, replace it
Other Error Codes for WA52J8700AW
Your washer's leak sensor has been triggered.
Your washer's door-related module has lost connection.
Your washer's motor speed controller has lost connection to the main board.
Your washer is overfilling with water.
Your washer's power module is overheating.
Your washer has detected a water leak.
Your washer's main computer chip has failed.
Your washer's motor cannot spin properly.