Error Code 5C
Your washer cannot pump the water out.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 5C
What This Means
Drain pump impeller is damaged internally; Wrong voltage supplied to parts; Drain pump part fault; Frozen water in drain line (winter); Drain hose is clogged (foreign material or injection issue); Foreign material in drain pump assembly (rubber bands, bills, cotton, hair pins, coins); Drain pump wire terminal not connected or broken; Main PBA fault
What actually causes this:
Small items like coins, hair pins, or fabric debris have clogged the drain pump filter.
First Thing to Check
Check the drain hose for kinks and make sure it is not pushed too far into the standpipe.
Parts Involved
How to Fix
- 1
1. Check if there is any foreign material inside the drain pump motor
- 2
2. Check the natural drain in the same manner
- 3
3. Check for incorrect connections or broken wires
- 4
4. If the machine malfunctions intermittently when wash tub water temperature is high, replace the pump
- 5
5. Measure drain pump resistance: 13.5 to 16.5 ohms
- 6
6. If the motor stops due to frozen water, remove the frozen water per relevant repair procedures
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
Other Error Codes for WA54R7200AV
Your washer cannot detect how much water is in the tub.
A vibration sensor wire has come loose inside the washer.
The washer's WiFi module has lost its connection to the main board.
Your washer's door lock mechanism is not working correctly.
Your washer is filling with too much water and cannot detect when to stop.
Your washer has detected a water leak.
An internal power module in the washer is overheating.
Your washer's vibration sensor is not communicating properly.