Error Code 9C2
Your washer is receiving too much electrical power.
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: 9C2
What This Means
Over-voltage supplied to the washer; Unstable household power supply; Main PBA fault (sometimes)
What actually causes this:
Unstable household power supply delivering voltage above the acceptable range.
First Thing to Check
Unplug the washer, wait one minute, and plug it back in to see if the error clears.
Parts Involved
How to Fix
- 1
1. Check the consumer's power conditions and operating voltage
- 2
2. Connect a tester to the internal power terminals during Boil or Dry operations and observe
- 3
3. Check whether a plug receptacle is used
- 4
4. If all power checks pass, replace the main PBA
Other Error Codes for WA54R7200AW
Your washer cannot detect how much water is in the tub.
A vibration sensor wire has come loose inside the washer.
The washer's WiFi module has lost its connection to the main board.
Your washer's door lock mechanism is not working correctly.
Your washer is filling with too much water and cannot detect when to stop.
Your washer has detected a water leak.
An internal power module in the washer is overheating.
Your washer's vibration sensor is not communicating properly.