Error Code LC1
A water leak has been detected near the drain pump area.
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: LC1
What This Means
Same causes as LC; Foreign material in draining bellows; Internal hose defect or assembly fault
What actually causes this:
The drain pump motor seal has failed, allowing water to leak out during draining.
First Thing to Check
Stop using the washer and check under it for water pooling near the back or bottom.
Parts Involved
How to Fix
- 1
1. Check for foreign material in the draining bellows
- 2
2. Check if drain pump is defective
- 3
3. Check if water leaks from tub connection part
Other Error Codes for WA54R7200AW
Your washer cannot detect how much water is in the tub.
A vibration sensor wire has come loose inside the washer.
The washer's WiFi module has lost its connection to the main board.
Your washer's door lock mechanism is not working correctly.
Your washer is filling with too much water and cannot detect when to stop.
Your washer has detected a water leak.
An internal power module in the washer is overheating.
Your washer's vibration sensor is not communicating properly.