Error Code PC1
The mechanism that switches between washing and spinning is not working.
Moderate
Address soon - your appliance may not work properly
Also displayed as: PC1
What This Means
Clutch error after clutch movement; Clutch mechanism fault; Wiring issue
What actually causes this:
The clutch assembly that controls the switch between agitation and spin has worn out or jammed.
First Thing to Check
Unplug the washer, wait a few minutes, then try a spin-only cycle to test.
Parts Involved
How to Fix
- 1
1. Check clutch motor wiring and connections
- 2
2. Test clutch motor operation after movement
- 3
3. Replace clutch assembly or Main PBA if defective
Other Error Codes for WA54R7600AV
Your washer cannot detect how much water is in the tub.
A vibration sensor wire has come loose inside the washer.
The washer's WiFi module has lost its connection to the main board.
Your washer's door lock mechanism is not working correctly.
Your washer is filling with too much water and cannot detect when to stop.
Your washer has detected a water leak.
An internal power module in the washer is overheating.
Your washer's vibration sensor is not communicating properly.