Error Code TC1
The washer cannot read the water temperature correctly.
Moderate
Address soon - your appliance may not work properly
Also displayed as: TC1
What This Means
Washing heater temperature sensor has a contact check or fault; Connector connected incorrectly or disconnected; Freezing in winter causing sensor failure; Temperature sensor reads abnormally due to frozen water
What actually causes this:
The temperature sensor connector has come loose or the sensor itself has failed.
First Thing to Check
Unplug the washer for 60 seconds, then plug back in and try a cold water cycle.
Parts Involved
How to Fix
- 1
1. Check the connections for the washing heater temperature sensor connector
- 2
2. If the washing heater temperature sensor has a functional error, replace it
- 3
3. Check for freezing conditions
Other Error Codes for WA55A7300AE
The washer's clutch moved but did not reach the correct position.
The washer's main computer chip has malfunctioned.
The washer's main computer chip has malfunctioned.
The washer's main computer chip has malfunctioned.
The drying heater has an electrical problem.
The washer has detected a water leak somewhere in the system.
The laundry load is uneven and the washer cannot spin safely.
The washer detected too many soap bubbles and is working to remove them.