Error Code 4C2
The incoming water is too hot for the selected wash cycle.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 4C2
What This Means
Temperature of water supplied through the dry valve during a dry cycle is sensed as higher than 70°C; Water temperature sensed as higher than 50°C in Wool or Lingerie courses
What actually causes this:
The hot and cold water hoses are connected to the wrong inlets on the back of the washer.
First Thing to Check
Check that the hot water hose goes to the hot inlet (usually marked red) and the cold water hose goes to the cold inlet (usually marked blue).
Parts Involved
How to Fix
- 1
1. Verify hot and cold water hoses are not swapped at the back of the machine
- 2
2. Check the water supply temperature at the tap
- 3
3. Verify the temperature sensor is functioning correctly
Other Error Codes for WA55A7300AV
An internal circuit board is not communicating properly.
The washer's vibration sensor is sending bad data.
An internal vibration sensor connection has failed.
The washer's position sensor thinks the machine is not level.
The washer's vibration sensor may be faulty.
The washer's vibration sensor may be faulty.
The washer's clutch moved but did not reach the correct position.
The washer's main computer chip has malfunctioned.