What does error code 9C5 mean on a Samsung WD53DBA900HZA1?

The washer is detecting unusual electrical activity when it should be idle Abnormal current sensing defect in ready state which is not operating motor; PBA control circuit fault

How do I fix error code 9C5 on my Samsung WD53DBA900HZA1?

1. undefined: 1. Check the consumer's power conditions 2. undefined: 2. Make sure to check the operating voltage 3. undefined: 3. If the PBA control circuit is faulty, replace the PBA 4. undefined: 4. After eliminating the AC Connector PBA, check whether it is shorted or just replace Main PBA

Samsung WD53DBA900HZA1Washer

Error Code 9C5

The washer is detecting unusual electrical activity when it should be idle

Moderate

Address soon - your appliance may not work properly

Also displayed as: 9C5

What This Means

Abnormal current sensing defect in ready state which is not operating motor; PBA control circuit fault

What actually causes this:

A circuit board issue inside the washer is sending false signals

First Thing to Check

Unplug the washer for 5 minutes, then plug it back in and try again

Parts Involved

Main PBA

How to Fix

1
1. Check the consumer's power conditions
2
2. Make sure to check the operating voltage
3
3. If the PBA control circuit is faulty, replace the PBA
4
4. After eliminating the AC Connector PBA, check whether it is shorted or just replace Main PBA