Error Code NC3
The dehumidifying kit is missing or not properly installed
Moderate
Address soon - your appliance may not work properly
Also displayed as: NC3
What This Means
Dehumidifying kit not inserted; Magnet of dehumidifying kit not detected; PBA defect
What actually causes this:
The dehumidifying component was removed and not put back
First Thing to Check
Check that the dehumidifying kit is installed in its correct position
Parts Involved
How to Fix
- 1
1. Insert the dehumidifying kit and operate
- 2
2. Check if there is a magnet inside the dehumidifying kit
- 3
3. If the problem remains unresolved, it may be a PBA defect
Other Error Codes for WD53DBA900HZA1
A dryer button is being registered as stuck or continuously pressed
The heat pump compressor motor has failed or lost its connection
A temperature sensor on the refrigerant line is reading incorrectly
A temperature sensor on the evaporator inlet is reading incorrectly
A temperature sensor on the evaporator outlet is reading incorrectly
A temperature sensor on top of the compressor is reading incorrectly
The dryer heater temperature sensor is reading incorrectly
The door lock has been forced too many times and is malfunctioning