Error Code SUD
There are too many soap suds in the washer drum
Moderate
Address soon - your appliance may not work properly
Also displayed as: SUD
What This Means
Too much detergent used; Non-HE (High Efficiency) detergent used; Excessive foaming detected during wash cycle
What actually causes this:
Too much detergent was added, or regular detergent was used instead of HE detergent
First Thing to Check
Wait for the washer to finish removing the suds on its own — it will resume automatically
How to Fix
- 1
1. Wait for the washer to complete foam removal automatically
- 2
2. When End is displayed, the normal cycle will proceed
- 3
3. Reduce detergent amount for future loads
- 4
4. Ensure HE (High Efficiency) detergent is being used
Other Error Codes for WD53DBA900HZA1
A dryer button is being registered as stuck or continuously pressed
The heat pump compressor motor has failed or lost its connection
A temperature sensor on the refrigerant line is reading incorrectly
A temperature sensor on the evaporator inlet is reading incorrectly
A temperature sensor on the evaporator outlet is reading incorrectly
A temperature sensor on top of the compressor is reading incorrectly
The dryer heater temperature sensor is reading incorrectly
The door lock has been forced too many times and is malfunctioning