Error Code SUD
There are too many soap bubbles inside the washer
Moderate
Address soon - your appliance may not work properly
Also displayed as: SUD
What This Means
Too much detergent used; Non-HE (High Efficiency) detergent used; Excessive foaming from certain fabric types or detergent combinations
What actually causes this:
Too much detergent was used, or the wrong type of detergent (non-HE) was used
First Thing to Check
Wait for the washer to finish removing the suds on its own — it will continue the cycle automatically
How to Fix
- 1
1. Allow the washer to finish the automatic suds removal process
- 2
2. When 'End' is displayed, the normal cycle proceeds
- 3
3. Reduce detergent amount for future loads
- 4
4. Verify HE-rated detergent is being used
Other Error Codes for WF22C6400AP
A button on the control panel is stuck or pressed in
The washer thinks the door is open
The small add-door on the front of the washer is open
The small add-door lock motor is not working correctly
The washer overheated and shut itself off for safety
The washer is filling with too much water and cannot stop
The washer is not filling with water
The washer is not getting the right amount of electrical power