Error Code AC3
An internal module has lost communication with the main board
Moderate
Address soon - your appliance may not work properly
Also displayed as: AC3
What This Means
Communication error between DR Module and main PBA; Incorrect or loose connections between DR Module and main PBA; Faulty soldering on DR Module
What actually causes this:
A connector inside the washer came loose during vibration or shipping
First Thing to Check
Unplug the washer for 60 seconds and plug it back in — if the error returns, it needs service
Parts Involved
How to Fix
- 1
1. Check the connector connections between the DR Module and main PBA carefully
- 2
2. Check for incorrect or loose connections
- 3
3. Remove the DR Module and check for any faulty soldering
- 4
4. If connections are fine, replace the DR Module or main PBA
Other Error Codes for WF22C6400AV
A button on the control panel is stuck or pressed in
The washer thinks the door is open
The small add-door on the front of the washer is open
The small add-door lock motor is not working correctly
The washer overheated and shut itself off for safety
The washer is filling with too much water and cannot stop
The washer is not filling with water
The washer is not getting the right amount of electrical power