Error Code LO
Your washer door will not unlock after the cycle finished.
Moderate
Address soon - your appliance may not work properly
Also displayed as: LO
What This Means
Door lock switch terminal is connected incorrectly; Door lock switch terminal is broken; Intermittent electric wire leakage; Main PCB fault
What actually causes this:
The electronic door latch is stuck in the locked position, often due to a loose wiring connection or a worn-out lock mechanism.
First Thing to Check
Wait 5 minutes after the cycle ends, then try opening the door. If still locked, unplug the washer for 2 minutes.
Parts Involved
How to Fix
- 1
1. Check and repair the power wire connections and insulation state
- 2
2. Check the door switch — replace if faulty
- 3
3. Check the main PBA door sensing circuit — replace if faulty
- 4
4. Check the door lock switch resistance: pins 3 and 5 must be approximately 949Ω
Other Error Codes for WF42H5000AW
Your washer's motor cannot spin the drum.
The control boards inside your washer are not communicating.
Your washer is not getting enough water.
Your washer lost power briefly during a cycle.
A button on your washer's control panel appears stuck.
Your washer detected a problem with its water heating system.
Your washer thinks the door is not closing properly.
Your washer is overfilling with water.