Error Code SUD
Your washer detected too many soap suds and is working to remove them.
Moderate
Address soon - your appliance may not work properly
Also displayed as: SUD or SUdS
What This Means
Too much detergent used; Wrong type of detergent (non-HE detergent used in HE machine); Excessive foaming detected during wash cycle
What actually causes this:
Too much detergent was added, or regular detergent was used instead of the HE (High Efficiency) type required for front-load washers.
First Thing to Check
Just wait — the washer will remove the extra suds on its own and then continue the cycle.
How to Fix
- 1
1. Wait for the washer to complete its automatic foam-removal process — 'End' is displayed when finished
- 2
2. Verify the consumer is using HE (High Efficiency) detergent
- 3
3. Check the amount of detergent being used — reduce the quantity
- 4
4. This is a normal protective operation, not a malfunction
Other Error Codes for WF45N5300AW
An internal communication module in your washer has lost its connection.
Your washer's vibration sensor has a general fault.
Your washer's main computer board has crashed and cannot recover.
Your washer's door lock mechanism has a hardware fault.
Your washer's motor controller has lost communication with the main board.
Your washer is not getting enough water to start or continue the cycle.
Your washer is not getting enough electrical power to run properly.
Your washer cannot detect the water level inside the drum.