Error Code DC1
The washer's door lock mechanism has a problem
Moderate
Address soon - your appliance may not work properly
Also displayed as: DC1
What This Means
Door lock switch terminal connected incorrectly; Door lock switch terminal broken; Intermittent electric wire leakage; Main PCB fault
What actually causes this:
The electronic door lock is worn out or a wire connection to it came loose
First Thing to Check
Try opening and firmly re-closing the door — listen for the locking click sound
Parts Involved
How to Fix
- 1
1. Check the door lock switch terminal connections
- 2
2. Measure door lock switch resistance: pins 2 and 3 should be approximately 60-90 ohms (in pushed slider state)
- 3
3. Check for wire leakage or intermittent connections
- 4
4. Check the main PBA door sensing circuit — replace if faulty
Other Error Codes for WF50A8600AE
The washer's main computer chip has failed
The washer's motor can't spin properly
Your washer isn't getting enough electrical power
Your washer is getting too much electrical power
The washer's display screen lost its connection to the main board
An internal communication module lost its connection
The washer's Wi-Fi module lost its connection to the main board
The washer door isn't closing or locking properly