Error Code SUd
There are too many soap suds in the washer
Moderate
Address soon - your appliance may not work properly
Also displayed as: SUd or SUdS
What This Means
Too much detergent used; Wrong type of detergent used (non-HE detergent in HE washer); Excessive suds preventing proper water level sensing
What actually causes this:
Too much detergent was used, or regular (non-HE) detergent was used instead of the HE type required for front-loading washers
First Thing to Check
Just wait — the washer will remove the extra suds automatically and then continue the cycle
Parts Involved
How to Fix
- 1
1. Wait for the washer to complete the suds removal process — it will display SUd or SUdS during removal and End when finished
- 2
2. Reduce the amount of detergent in future loads
- 3
3. Ensure HE (High Efficiency) detergent is being used
- 4
4. If the error occurs repeatedly with correct detergent amount, run a Pure Cycle (tub cleaning) to clear residual buildup
Other Error Codes for WF56H9100AG
An internal electronic module cannot communicate with the main board
The motor speed controller cannot communicate with the main board
The washer's main computer chip has stopped working
The washer's main computer chip has stopped working
The washer cannot detect the water level properly
The washer motor cannot spin or is struggling to turn
The washer is not getting water to fill the tub
The incoming water is too hot for the selected cycle