Error Code FC
The drying fan isn't spinning fast enough
Minor
Usually easy to fix - may resolve on its own
Also displayed as: No display
What This Means
Dry fan motor defective or failing; Fan motor connector disconnected; Fan blade obstructed by debris; Main PBA fan motor relay defective
What actually causes this:
The drying fan motor is wearing out or something is blocking it from spinning properly
First Thing to Check
If your dishes aren't drying well, this could be the cause — there's no action you can take at home for this one
Parts Involved
How to Fix
- 1
1. Check and reconnect dry fan motor connectors
- 2
2. Check the resistance of the dry fan motor coil (disconnect first) — normal: approximately 150 ohm
- 3
3. Check for obstructions at the fan blade
- 4
4. Check fan motor relay voltage — 120V while operating
- 5
5. If fan motor tests normal, replace Main PBA
Other Error Codes for DW80R5061US
A control panel button appears to be stuck
The heating element is not warming the water properly
The heating element isn't warming the water properly
The dishwasher's main control board and display board can't talk to each other
Water is leaking inside the base of the dishwasher
The automatic door opening feature isn't working
The water valve is letting small amounts of water in when it shouldn't be
The dishwasher can't drain the water out