Error Code PC
The water distribution motor can't find its position
Minor
Usually easy to fix - may resolve on its own
Also displayed as: No display
What This Means
Synchronous motor is defective; Location detection in the cam is incorrect; Motor connector disconnected; Main PBA defect
What actually causes this:
The motor that directs water flow to different spray arms has gotten stuck or lost its position
First Thing to Check
Try running a different cycle — if all cycles have poor cleaning on one rack, the distributor motor needs service
Parts Involved
How to Fix
- 1
1. Check and reconnect the synchronous motor connector
- 2
2. Check synchronous motor operation — verify it reaches target position
- 3
3. Inspect the cam for mechanical damage or misalignment
- 4
4. If motor and cam are normal, replace Main PBA
Other Error Codes for DW80R5061UT
A control panel button appears to be stuck
The heating element is not warming the water properly
The heating element isn't warming the water properly
The dishwasher's main control board and display board can't talk to each other
Water is leaking inside the base of the dishwasher
The automatic door opening feature isn't working
The water valve is letting small amounts of water in when it shouldn't be
The dishwasher can't drain the water out