Error Code bC2
A control panel button appears to be stuck
Minor
Usually easy to fix - may resolve on its own
Also displayed as: No display
What This Means
Touch button is out of order; An object is resting on the touch button; Condensation on the PBA connector; Sub PBA defective
What actually causes this:
Moisture from steam got into the control panel, making it think a button is being held down
First Thing to Check
Wipe down the control panel to remove any moisture and make sure nothing is pressing against the buttons
Parts Involved
How to Fix
- 1
1. Check whether there is condensation on the PBA — check CN103 of Display Control Module connector and CN100 Touch Module connector — Normal: no condensation
- 2
2. If condensation found, remove all condensation and moisture and dry thoroughly
- 3
3. If no condensation, replace the Control Panel Assembly (Display Control Module, Touch Module, Sub Wire)
Other Error Codes for DW80R7061US
The heating element is not warming the water during the wash cycle
The main wash pump that sprays water onto your dishes is not working
The touch buttons and the control board inside the door cannot communicate
The water inside the dishwasher is dangerously hot
The motor that directs water to different spray zones is not working properly
The water temperature sensor is not reading correctly
The main control board and the motor control board cannot communicate
The drying fan is not spinning fast enough to dry your dishes