How do I fix error code tE2 on my LG DLEX3370V?

1. undefined: Follow the same diagnostic procedure as tE1. 2. undefined: tE2 typically indicates a shorted thermistor rather than open circuit. 3. undefined: Turn power off and discharge voltage. 4. undefined: Disconnect the NA6 connector from the main PCB. 5. undefined: Measure resistance between thermistor terminals. 6. undefined: If resistance is near 0Ω (shorted): replace the thermistor. 7. undefined: If resistance is within Table 1 range: check harness connectors for pinched or shorted wires. 8. undefined: If harness is good: replace the main PCB controller.

LG DLEX3370VDryer

Error Code tE2

Outlet thermistor open or shorted (short circuit variant)

Moderate

Address soon - your appliance may not work properly

Also displayed as: tE2

How to Fix

1
Follow the same diagnostic procedure as tE1.
2
tE2 typically indicates a shorted thermistor rather than open circuit.
3
Turn power off and discharge voltage.
4
Disconnect the NA6 connector from the main PCB.
5
Measure resistance between thermistor terminals.
6
If resistance is near 0Ω (shorted): replace the thermistor.
7
If resistance is within Table 1 range: check harness connectors for pinched or shorted wires.
8
If harness is good: replace the main PCB controller.

Other Error Codes for DLEX3370V

EEPROM operation is abnormal

tE1

Outlet thermistor open or shorted

Sensors do not detect that steam generator is full within 60 seconds

Electric dryer power cord not connected correctly or house power supply is incorrect

Power failure / house fuse blown / circuit breaker tripped

NFC module is wrong / incompatible

tE5

Pump valve resistance less than 10 in test mode; pump circuit fault

tE4

Steam generator thermistor open or shorted

Need more help with your LG DLEX3370V?