Error Code nE
Modem is abnormal. Displayed in test mode only.
Moderate
Address soon - your appliance may not work properly
Also displayed as: nE
What This Means
Modem module failure
How to Fix
- 1
Confirm nE in diagnostic test mode
- 2
Check modem module connector for loose connection
- 3
Reseat connector; power cycle dryer
- 4
If fault persists, replace modem module or main PCB
Other Error Codes for DLEX5000V
Water supply pump AD value below 10 in test mode — pump failure or wiring fault.
Humidity sensor failure.
Wi-Fi module abnormal. Displayed in test mode only.
Steam generator thermistor open or shorted. Displayed in test mode only.
EEPROM operation abnormal. Displayed in test mode only.
Steam generator thermistor error — displayed in test mode only.
FlowSense duct restriction at approximately 80% blockage — displayed after drying cycle.
FlowSense duct blockage at approximately 95% — critically restricted. Error displayed for 2 hours.