How do I fix error code EE on my LG DLEX7600WE?

1. undefined: EE error only appears during diagnostic test mode. 2. undefined: Disconnect power for at least 60 seconds to allow controller to fully reset. 3. undefined: Restore power and re-enter diagnostic test mode. 4. undefined: If EE error persists, replace the main PCB/controller assembly. 5. undefined: When handling replacement controller, use anti-static wrist strap grounded to chassis to prevent ESD damage.

LG DLEX7600WEDryer

Error Code EE

EEPROM error

Moderate

Address soon - your appliance may not work properly

Also displayed as: EE

How to Fix

1
EE error only appears during diagnostic test mode.
2
Disconnect power for at least 60 seconds to allow controller to fully reset.
3
Restore power and re-enter diagnostic test mode.
4
If EE error persists, replace the main PCB/controller assembly.
5
When handling replacement controller, use anti-static wrist strap grounded to chassis to prevent ESD damage.

Other Error Codes for DLEX7600WE

tE1

Thermistor of blower housing open or shorted

tE2

Thermistor of blower housing open or shorted (secondary)

Door switch abnormal

d90

FlowSense - ductwork 90-95% blocked

d80

FlowSense - ductwork restriction detected (80% blocked)

tE4

Thermistor of steam generator open or shorted

Power failure or incorrect power supply

Pump (DC motor) failure

Need more help with your LG DLEX7600WE?