Error Code tE2

Thermistor of blower housing open or shorted (secondary)

Also displayed as: tE2

How to Fix

1. 1

   Follow identical diagnostic steps as tE1.

2. 2

   Disconnect power and remove the NA6 connector from the controller.

3. 3

   Short Pin 4 (Blue Wire) and Pin 3 (Orange Wire) of the NA6 connector with a metal jumper.

4. 4

   If error clears, check connector seating at NA6 and 6-pin controller connector.

5. 5

   If error persists, separate the thermistor harness from the thermistor assembly connector and measure resistance.

6. 6

   Verify resistance matches Table 1 temperature/resistance values for ambient temperature.

7. 7

   If out of range, replace thermistor.

8. 8

   If in range, inspect and reseat harness linking connector.

9. 9

   If all checks pass, replace the main controller.

This Error Applies To

LG DLEX7600BE Series Dryers (2017) (2017–present)