Error Code dE

Door switch abnormal

Also displayed as: dE

How to Fix

1. 1

   Note: dE is only displayed during diagnostic test mode, not during normal operation.

2. 2

   Disconnect power before measuring resistance.

3. 3

   With door closed: measure resistance between BL2-connector (White wire) and BK2-connector (Black wire) after removing BL2 and WH4 connectors from controller; expect less than 2500 Ω.

4. 4

   If resistance is above 2500 Ω with door closed, check door switch continuity (COM to NO terminal should be less than 1 Ω).

5. 5

   With door open: measure resistance between BL2 (White wire) and BK2 (Black wire); expect 300–600 Ω (lamp resistance in circuit); if out of range, check lamp and door switch.

6. 6

   With door open: measure resistance between WH4 (Yellow wire) and BL2 (White wire); should be less than 1 Ω.

7. 7

   With door closed: measure resistance between WH4 (Yellow wire) and BL2 (White wire); should be less than 1 Ω.

8. 8

   If all wiring checks pass, check and replace controller.

9. 9

   Check harness-linking connector.

This Error Applies To

LG DLEX7600BE Series Dryers (2017) (2017–present)