Error Code d95
Duct blockage — ductwork approximately 95% blocked (displayed for 2 hours only)
Moderate
Address soon - your appliance may not work properly
Also displayed as: d95
How to Fix
- 1
Do not operate the dryer — exhaust restriction at 95% is a fire hazard.
- 2
Follow all steps for d90 error above.
- 3
Ductwork should be professionally cleaned or replaced before resuming operation.
- 4
After repair, run installation check test to confirm exhaust is clear.
Other Error Codes for DLG8401WE
Flow Sense duct blockage restriction detected after drying cycle ends
Duct blockage — ductwork approximately 90% blocked (displayed for 2 hours only)
Temperature sensor (thermistor) failure — shorted circuit
Humidity (moisture) sensor failure
Gas supply error — gas not supplied to the dryer
Steam pump error — pump AD value below threshold during diagnostic test
Power supply error — electric dryer power cord not connected correctly or house power supply incorrect; also displayed when 240V is applied to PCB indicating mis-wired power cord
Temperature sensor (thermistor) failure — open circuit