Error Code PS

Electric dryer power cord not connected correctly or house power supply is incorrect

Also displayed as: PS

How to Fix

1. 1

   Verify power cord wiring: Neutral (white) to center terminal block screw, Red and Black to left and right terminal block screws, Green ground to external ground screw.

2. 2

   Check that Black, White, and Red wire connections are correct and not reversed.

3. 3

   Verify outlet voltage is 208–240VAC ±10% at L1 and L2.

4. 4

   Check if house fuse is blown or circuit breaker has tripped.

5. 5

   Reset circuit breaker or replace fuse — do not increase fuse capacity.

6. 6

   If circuit overload is present: have a qualified electrician correct it.

7. 7

   Ensure strain relief screw is tightened and all terminal block nuts are tight.