How do I fix error code d80 on my LG DLGX4271V?

1. undefined: Check exhaust duct for lint buildup, blockages, or damage. 2. undefined: Inspect vent hood at exterior for lint clogging or damage. 3. undefined: Verify outside vent shows strong airflow while dryer is running. 4. undefined: Dryer can continue to operate at d80, but drying times will be longer. 5. undefined: Clean ductwork. Indicator remains on for 2 hours after end of cycle; open door or press POWER to clear display. 6. undefined: Shorten duct run or reduce number of elbows if duct is excessively long.

LG DLGX4271VDryer

Error Code d80

FlowSense — exhaust duct approximately 80% blocked

Moderate

Address soon - your appliance may not work properly

Also displayed as: d80

How to Fix

1
Check exhaust duct for lint buildup, blockages, or damage.
2
Inspect vent hood at exterior for lint clogging or damage.
3
Verify outside vent shows strong airflow while dryer is running.
4
Dryer can continue to operate at d80, but drying times will be longer.
5
Clean ductwork. Indicator remains on for 2 hours after end of cycle; open door or press POWER to clear display.
6
Shorten duct run or reduce number of elbows if duct is excessively long.

Other Error Codes for DLGX4271V

Power supply wiring error — electric dryer power cord connected incorrectly

d95

FlowSense — exhaust duct approximately 95% blocked

NFC module open or shorted

tE5

Water supply pump current is less than threshold (pump fault)

d90

FlowSense — exhaust duct approximately 90% blocked

Humidity sensor failure

NFC module wrong or not recognized

Door open error — door not closed during operation

Need more help with your LG DLGX4271V?