How do I fix error code EE on my LG DLGX4271V?

1. undefined: Enter diagnostic test mode to confirm EE error. 2. undefined: Power cycle the dryer and re-enter test mode. 3. undefined: If EE persists: replace the main PCB assembly. 4. undefined: Verify software version displayed (e.g., 1nES-U03-d02 for electric, 1n9S for gas) matches expected firmware.

LG DLGX4271VDryer

Error Code EE

EEPROM error — abnormal PCB EEPROM operation

Moderate

Address soon - your appliance may not work properly

Also displayed as: EE

How to Fix

1
Enter diagnostic test mode to confirm EE error.
2
Power cycle the dryer and re-enter test mode.
3
If EE persists: replace the main PCB assembly.
4
Verify software version displayed (e.g., 1nES-U03-d02 for electric, 1n9S for gas) matches expected firmware.

Other Error Codes for DLGX4271V

Power supply wiring error — electric dryer power cord connected incorrectly

d95

FlowSense — exhaust duct approximately 95% blocked

NFC module open or shorted

tE5

Water supply pump current is less than threshold (pump fault)

d80

FlowSense — exhaust duct approximately 80% blocked

d90

FlowSense — exhaust duct approximately 90% blocked

Humidity sensor failure

NFC module wrong or not recognized

Need more help with your LG DLGX4271V?