Error Code EEE
The dryer's memory chip has a communication error
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: EEE
What This Means
PCB with EEPROM circuit failure; Corrupted EEPROM data; Faulty PCB
What actually causes this:
A power surge or electrical glitch corrupted the dryer's internal memory.
First Thing to Check
Unplug the dryer for 5 minutes, then plug it back in — this may clear the error.
Parts Involved
How to Fix
- 1
1. Check PCB with EEPROM circuit
- 2
2. Power cycle the dryer to see if error clears
- 3
3. If error persists, replace Main PCB
Other Error Codes for DV42H5600
Your dryer is getting the wrong voltage from the outlet
A button on the control panel is stuck or shorted
The dryer's internal parts aren't communicating properly
Your dryer's temperature sensor isn't reading correctly
The dryer thinks the door is open while running
Your dryer is getting the wrong type of electrical power
The door switch isn't working properly
Your dryer isn't heating properly or is overheating