Name: Samsung DVE50M7450W
Brand: Samsung

Question 1

What does error code 9C1 mean on Samsung DVE50M7450W?

Accepted Answer

Your dryer is getting the wrong voltage from the outlet. Cause: Improper power supply to the dryer; Voltage out of range at the outlet; Faulty outlet or wiring; Main PCB electronic control failure.

Question 2

What does error code AC mean on Samsung DVE50M7450W?

Accepted Answer

The dryer's internal parts aren't communicating properly. Cause: Faulty Main PBA (main control board); Faulty SUB PBA (display board); Damaged or loose wire harness between Main PBA and SUB PBA.

Question 3

What does error code dC mean on Samsung DVE50M7450W?

Accepted Answer

The dryer thinks the door is open while running. Cause: Door not fully closed or latched; Laundry caught in the door preventing proper closure; Door switch malfunction; Loose wire terminals in door sense circuit.

Question 4

What does error code dF mean on Samsung DVE50M7450W?

Accepted Answer

The door switch isn't working properly. Cause: Defective door switch giving invalid readings; Loose wire terminals in door sense circuit; Open or damaged wire terminals in door sense circuit; Door switch installed in wrong orientation after service.

Question 5

What does error code FC mean on Samsung DVE50M7450W?

Accepted Answer

Your dryer is getting the wrong type of electrical power. Cause: Non-standard power source frequency (not 60Hz); Generator or inverter power supply with unstable frequency; Power frequency sense circuit fault on main PCB.

Question 6

What does error code HC mean on Samsung DVE50M7450W?

Accepted Answer

Your dryer isn't heating properly or is overheating. Cause: Clogged lint filter restricting airflow and causing heat buildup; Restricted exhaust vent system; Thermistor failure causing incorrect temperature readings; Heater malfunction; Thermostat failure.

Question 7

What does error code tC mean on Samsung DVE50M7450W?

Accepted Answer

Your dryer's temperature sensor isn't reading correctly. Cause: Clogged lint screen restricting airflow and causing abnormal temperature readings; Restricted vent system causing heat buildup; Thermistor 1 resistance out of range (open or shorted); Faulty wiring between thermistor and main PCB.

Question 8

What does error code tC5 mean on Samsung DVE50M7450W?

Accepted Answer

A secondary temperature sensor is giving bad readings. Cause: Clogged lint screen restricting airflow; Restricted vent system; Thermistor 2 (vent thermistor) resistance out of range (open or shorted); Faulty wiring between vent thermistor and main PCB.

DVE50M7450W

Error Codes

On this page

Warranty

Samsung Support

Track your Samsung

Code	Meaning	Severity
9C1	Your dryer is getting the wrong voltage from the outlet	Critical
AC	The dryer's internal parts aren't communicating properly	Critical
dC	The dryer thinks the door is open while running	Moderate
dF	The door switch isn't working properly	Moderate
FC	Your dryer is getting the wrong type of electrical power	Moderate
HC	Your dryer isn't heating properly or is overheating	Critical
tC	Your dryer's temperature sensor isn't reading correctly	Moderate
tC5	A secondary temperature sensor is giving bad readings	Moderate