Error Code bC2
A button on the control panel is stuck or shorted
Moderate
Address soon - your appliance may not work properly
Also displayed as: bC2
What This Means
Display PCB loose connection; Display PCB shorted; Stuck or jammed button on control panel; Moisture or debris on control panel causing short
What actually causes this:
A button got stuck from moisture, spilled liquid, or just normal wear over time.
First Thing to Check
Press each button on the control panel a few times to see if any feel stuck or unresponsive.
Parts Involved
How to Fix
- 1
1. Check if any buttons on the control panel are stuck or jammed
- 2
2. Inspect the Display PCB for signs of damage, loose connections, or short circuit
- 3
3. Check wiring between control panel and Display PCB
- 4
4. If Display PCB is confirmed loose or shorted, reseat or replace Display PCB
Other Error Codes for DVG45T3200
The dryer's internal parts aren't communicating properly
A secondary temperature sensor is giving bad readings
The door switch isn't working properly
Your dryer detected restricted airflow during a vent test
Your dryer is getting the wrong type of electrical power
Your dryer isn't heating properly or is overheating
Your dryer vent is about 80% blocked
The dryer thinks the door is open while running