How do I fix error code tE2 on a LG dryers?

1. undefined: Turn off the dryer power. 2. undefined: Remove connector NA6 from the controller. 3. undefined: Short pin 2 (Blue Wire) and pin 3 (Orange Wire) with a metal jumper. 4. undefined: If tE2 clears, verify NA6 and 6-pin connector are properly connected; if good, replace controller. 5. undefined: If tE2 persists, disconnect harness from thermistor assembly connector and measure resistance between terminals. 6. undefined: Compare measured resistance to Table 1; if out of range, replace thermistor. 7. undefined: If resistance is in range, check harness linking connector for damage and repair.

LG Dryers

Error Code tE2

Outlet thermistor open or shorted (second thermistor)

Moderate

Address soon - your appliance may not work properly

Also displayed as: tE2

How to Fix

1
Turn off the dryer power.
2
Remove connector NA6 from the controller.
3
Short pin 2 (Blue Wire) and pin 3 (Orange Wire) with a metal jumper.
4
If tE2 clears, verify NA6 and 6-pin connector are properly connected; if good, replace controller.
5
If tE2 persists, disconnect harness from thermistor assembly connector and measure resistance between terminals.
6
Compare measured resistance to Table 1; if out of range, replace thermistor.
7
If resistance is in range, check harness linking connector for damage and repair.

This Error Applies To

LG DLEX4370V Series Dryers

Service manual exact match: DLEX4370BService manual exact match: DLGX4371VService manual exact match: DLEX4370VService manual exact match: DLGX4371WService manual exact match: DLEX4370WService manual exact match: DLGX4371B

Related Error Codes

Power supply wire connection wrong or loose (electric dryer)

NFC module open or shorted

d80

Ductwork approximately 80% blocked

tE4

Steam generator thermistor open or shorted

Power failure or incorrect power supply

NFC module wrong or unresponsive

d90

Ductwork approximately 90% blocked

tE1

Outlet thermistor open or shorted

Need more help with your LG dryers?