How do I fix error code tE2 on a LG dryers?

1. undefined: Turn power off and discharge voltage. 2. undefined: Remove NA6 connector from controller. 3. undefined: Measure resistance between Pin 4 (Blue Wire) and Pin 5 (Orange Wire) on the thermistor harness side. 4. undefined: Compare to Table 1 reference values for current ambient temperature. 5. undefined: If shorted (near 0Ω), replace thermistor assembly. 6. undefined: If in range, check harness connectors and replace controller if fault persists.

LG Dryers2014–present

Error Code tE2

Thermistor of blower housing shorted (alternate display for thermistor fault)

Moderate

Address soon - your appliance may not work properly

Also displayed as: tE2

How to Fix

1
Turn power off and discharge voltage.
2
Remove NA6 connector from controller.
3
Measure resistance between Pin 4 (Blue Wire) and Pin 5 (Orange Wire) on the thermistor harness side.
4
Compare to Table 1 reference values for current ambient temperature.
5
If shorted (near 0Ω), replace thermistor assembly.
6
If in range, check harness connectors and replace controller if fault persists.

This Error Applies To

LG DLEX5780VE Series Dryers (2014) (2014–present)

Service manual exact match: DLGX5781WEService manual exact match: DLEX5780VEService manual exact match: DLEX5780WEService manual exact match: DLGX5781VE

Related Error Codes

Door switch abnormal

Water supply pump failure — pump AD value below 10 in test mode

tE1

Thermistor of blower housing open or shorted

tE4

Steam generator thermistor open or shorted

Power supply wire connection wrong or loose (Black-White-Red wiring)

EEPROM operation abnormal

Need more help with your LG dryers?