How do I fix error code HS on a LG dryers?

1. undefined: Turn off the dryer and call for service. 2. undefined: Inspect electrode sensor connections in the filter housing area. 3. undefined: Measure resistance of electrode sensor; verify continuity to control harness. 4. undefined: Replace electrode sensor assembly if defective.

LG Dryers

Error Code HS

Humidity sensor failure

Moderate

Address soon - your appliance may not work properly

Also displayed as: HS

How to Fix

1
Turn off the dryer and call for service.
2
Inspect electrode sensor connections in the filter housing area.
3
Measure resistance of electrode sensor; verify continuity to control harness.
4
Replace electrode sensor assembly if defective.

This Error Applies To

LG DLEX7900VE Series Dryers

Service manual exact match: DLEX7900WEService manual exact match: DLGX7901WEService manual exact match: DLEX7800VEService manual exact match: DLGX7801VEService manual exact match: DLEX7800WEService manual exact match: DLGX7801WEService manual exact match: DLEX7900VEService manual exact match: DLGX7901VE

Related Error Codes

tE4

Steam generator thermistor open or shorted

Steam pump AD value below 10 — pump abnormal

tE2

Thermistor fault — blower housing thermistor open or shorted (alternate code)

EEPROM error — EEPROM operation is abnormal

d80

FlowSense four-bar restriction detected — ductwork significantly restricted

Door switch abnormal — detected only in TEST MODE

d90

Ductwork approximately 90% blocked — FlowSense alert

tE1

Thermistor fault — blower housing thermistor open or shorted

Need more help with your LG dryers?