How do I fix error code E CS on a LG refrigerators?

1. undefined: Check for a loose or disconnected connector between Main PCB and the convertible sensor at CON8. 2. undefined: If connector is disconnected or loose, reconnect or repair. 3. undefined: Measure sensor resistance at CON8 pins 18-17 with power off. If 0 ohm (shorted), replace the sensor. 4. undefined: If resistance is open/infinite, go to step 6. 5. undefined: Compare resistance to table: 23°F/-5°C=38k, 32°F/0°C=30k, 41°F/5°C=24k, 50°F/10°C=19.5k, 59°F/15°C=16k. If out of range, replace sensor. 6. undefined: If resistance is normal, check harness integrity between sensor and PCB. If harness is good, replace the main PCB.

LG Refrigerators

Error Code E CS

Convertible Sensor Error (Pantry/Full-Convert Drawer sensor)

Moderate

Address soon - your appliance may not work properly

How to Fix

1
Check for a loose or disconnected connector between Main PCB and the convertible sensor at CON8.
2
If connector is disconnected or loose, reconnect or repair.
3
Measure sensor resistance at CON8 pins 18-17 with power off. If 0 ohm (shorted), replace the sensor.
4
If resistance is open/infinite, go to step 6.
5
Compare resistance to table: 23°F/-5°C=38k, 32°F/0°C=30k, 41°F/5°C=24k, 50°F/10°C=19.5k, 59°F/15°C=16k. If out of range, replace sensor.
6
If resistance is normal, check harness integrity between sensor and PCB. If harness is good, replace the main PCB.