Error Code E IS
Abnormal Icing (Ice Maker) Sensor — Ice maker sensor short or open.
Moderate
Address soon - your appliance may not work properly
Also displayed as: E IS
How to Fix
- 1
Step 1: Check if connector is disconnected or loose between Main PCB and sensor.
- 2
Step 2: If disconnected, reconnect or repair the connector.
- 3
Step 3: Check sensor resistance. If resistance is 0 ohm (short), change the sensor.
- 4
Step 4: Check sensor resistance. If resistance is OFF (open), replace the refrigerator main PCB.
- 5
Step 5: Verify resistance at CON1 15th~22nd pin against temperature table. If normal, explain to customer.
This Error Applies To
LG LHSXS2706 Series Refrigerators
Related Error Codes
Freezer Sensor Error — Freezer sensor short or open
Refrigerator Sensor Error — Refrigerator sensor (upper part) short or open
UV/Nano LED Module Error — Bad UV LED module or poor connection between display and UV module. Caused when feedback signals are abnormal.
Defrost Sensor Error — Defrost sensor short or open
Failed Defrosting — Defrost heater, temperature fuse short circuited or unplugged connector. Error indicated 4 hours after failure occurs.
Abnormal Freezer Fan Motor — Connection line of fan motor is fault, short, or open. Fault displayed when operating fan motor for 65 seconds without output signal.
Condenser Fan Motor Error — Connection line of condenser fan motor is fault, short, or open. Fault displayed when operating fan motor for 65 seconds without output signal.
Abnormal Communication Error — Connection line between main control panel and display panel is short or open. Signal transmission fails.