Error Code E rS
Refrigerator sensor error — short-circuit or disconnection of refrigerator sensor
Moderate
Address soon - your appliance may not work properly
Also displayed as: E rS
How to Fix
- 1
Check CON8 Pin 20 ~ Pin 19 for short (0 Ω) or open (infinite) resistance. Short = replace sensor immediately.
- 2
Check that the connector between Main PCB and refrigerator sensor is fully seated and undamaged. Reconnect or repair as needed.
- 3
Measure sensor resistance at Pin 20 ~ Pin 19 and compare against table (23°F=38kΩ, 32°F=30kΩ, 41°F=24kΩ, 50°F=19.5kΩ, 59°F=16kΩ).
- 4
If resistance is within normal range for the ambient temperature, explain to customer that operation is normal.
- 5
If resistance is abnormal with good connector, replace the refrigerator thermistor.
- 6
If the error persists after sensor replacement, replace the Main PCB.
This Error Applies To
LG LRFGC2706S Series Refrigerators
Related Error Codes
Humidity sensor error — short-circuit or disconnection of humidity sensor
Freezer icemaker sensor error — short-circuit or disconnection of ice maker sensor
Freezer ice maker kit defect — malfunction of ice maker motor
Freezer sensor error — short-circuit or disconnection of freezer sensor
Defrost sensor error — short-circuit or disconnection of freezer defrost sensor
Defrost heater error — defrost sensor did not reach 40°F (5°C) within 80 minutes after defrost start
Freezer BLDC fan motor error — no feedback signal from fan motor for more than 65 seconds
Condenser (machine room) BLDC fan motor error — no feedback signal for more than 65 seconds